Skip to main content

Aastra 700 Series (MX-One) - Serial Connection

These instructions help you configure your Aastra 700 Series (MX-One) phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Enterprise application:

Aastra MX-ONE BC10.TDS
Aastra MX-ONE BC10.TDT

Contents​

Configure the SMDR output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

The Aastra MX-ONE (Aastra 700) supports multiple SMDR output formats. TIM Enterprise requires the SMDR format to be set to either BC8, BC10 or BC13. For more information on how to configure the data output, please contact your system maintainer.

Installing NetPBX​

The Aastra MX-ONE (Aastra 700) phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Enterprise you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configuring TIM Enterprise​

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

  1. Click on the Directory tab.
  2. Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
  3. A new window will open, displaying the general properties of your PBX object. Select Aastra MX-ONE BC10 from the Data format list and tick the Keep a local backup of .data box, as shown below: aastra_mx_one tim
  4. Click on the Connection tab and select No connection required from the Connection method list.
  5. Click on the Save button to apply the settings. aastra_mx_one tim